Sangam: A Confluence of Knowledge Streams

A report on a series of tests carried out to determine the suitability of the grinding process for evaluating the efficiency of coolants to be used on the metal cutting processes process for evaluating the efficiency of coolants to be used on the metal cutting processes and also to evaluate the relative efficiency of 4 coolant samples for the drilling and turning processes

Show simple item record

dc.creator Purcell, J.
dc.date 2015-09-02T15:33:20Z
dc.date 2015-09-02T15:33:20Z
dc.date 1966-04
dc.date.accessioned 2022-05-25T16:02:41Z
dc.date.available 2022-05-25T16:02:41Z
dc.identifier http://dspace.lib.cranfield.ac.uk/handle/1826/9382
dc.identifier.uri http://localhost:8080/xmlui/handle/CUHPOERS/178385
dc.description A test programme was to be carried out to evaluate a series of additives for use in industrial metal cutting coolants for use initially on the turning, drilling and milling processes. These tests when they take the form of tool life tests are costly in time and material and where a shorter test can be reliably substituted for a life test, this is most desirable. To this end the grinding process was included in a pilot scheme to try to relate the grinding results to the drilling and turning results. Milling was not used in this pilot scheme. The grinding process has been very extensively studied at the College of Aeronautics during the past 10 years and a reliable method of evaluating the performance of grinding wheels and coolants has been developed and proved in a very wide range of industrial applications. The time required to evaluate a wheel or coolant sample is approximately 1 hour and the material consumed would be a few ounces in weight, hence, the desire to interpret coolant efficiency for the metal cutting processes from tests carried out using the controlled grinding process. (See ref. 1).
dc.language en
dc.publisher College of Aeronautics
dc.relation 98
dc.relation COA/M-98
dc.title A report on a series of tests carried out to determine the suitability of the grinding process for evaluating the efficiency of coolants to be used on the metal cutting processes process for evaluating the efficiency of coolants to be used on the metal cutting processes and also to evaluate the relative efficiency of 4 coolant samples for the drilling and turning processes
dc.type Report


Files in this item

Files Size Format View
COA_Memo_98_April_1966.pdf 19.65Mb application/pdf View/Open

This item appears in the following Collection(s)

Show simple item record

Search DSpace


Advanced Search

Browse